Find a Location
RIMEXCEL is a specially formulated light viscosity fluid that offers exceptional tire and wheel/rim protection when added to the tire air chamber. When compared to other leading rust inhibitors, the recommended quantity of RIMEXCEL required for your wheel is greatly reduced, saving you money.
The Right Formula for the Right Environment
Formula Container Size Item Number AP Green 20 liter pail (5 US gal) RXL-AP020 205 liter drum (54 US gal) RXL-AP205 1,000 liter tote (264 US gal) RXL-AP1000 MLT (mid-low temperature) 20 liter pail (5 US gal) RXL-MLT020 205 liter drum (54 US gal) RXL-MLT205 1,000 liter tote (264 US gal) RXL-MLT1000 LT (low temperature) 20 liter pail (5 US gal) RXL-LT020 205 liter drum (54 US gal) RXL-LT205 1,000 liter tote (264 US gal) RXL-LT1000
Recommended Quantity Chart by Tire Size
13.00 x 24/25 18.00 x 25 29.5 x 29 35/65 x 33 40/65 x 39 30.00 x 51 37.00 x 57 44/80 x 57 53.5 x 57 65/65 x 57 14.00 x 24 21.00 x 25 30/65 x 29 37.5 x 33 45/65 x 45 33.00 x 51 40.00 x 57 46/90 x 57 55.5/80 x 57 70/70 x 57 16.00 x 24 23.5 x 25 33.25 x 29 24.00 x 35 36.00 x 51 49/90 x 57 50/80 x 57 55/85 x 57 56/80 x 63 14.00 x 25 26.5 x 25 18.00 x 33 29.5 x 35 37.5 x 51 60/80 x 57 59/80 x 63 15.5 x 25 29.5 x 25 33.5 x 33 33.25 x 35 50/65 x 51 53/80 x 63 16.00 x 25 21.00 x 35 37.25 x 35 37.5 x 39 27.00 x 49
RIMEXCEL stops rust build-up by providing a protective anti-oxidant on wheels and rims. When installed based on the recommended quantity, RIMEXCEL provides rust protection from the day the wheel is mounted until it is dismounted.
- RIMEXCEL removes existing rust scale from wheels and rims and reduces the amount of downtime normally required for refinishing wheels and rims.
- Reduces labour costs for tire demounting, eliminate the need for messy coatings of rim and beads, and reduce rim loss from scale and painting.
- Available in a variety of container sizes to suit your specific site requirement and is manufactured to suit all temperature ranges.
- Specifically formulated light viscosity fluid that offers exceptional tire and rim protection when added to the tire air chamber.
Reduce Air Loss for Longer Tire Life
Between regular air checks, some loss of tire PSI may happen. With each pound of pressure loss, load carrying capacity is reduced and tire temperatures increase. RIMEXCEL reduces normal air loss by at least 60%. Bead seats, O-rings, vent hole leaking, blistered or cracked inner liners, even liners that have lifted loose from the ply are sealed off very effectively by RIMEXCEL.
RIMEXCEL is a non-flammable substance, safe for personnel and equipment. RIMEXCEL detects cracked rims before cracks are large enough to become a hazard to personnel. No fibres or fillers are used which allows rim cracks or serious tire injuries to lose air normally, reducing the chance of tire loss or blowout as the injured area expands in size.
RIMEXCEL keeps the inner liner lubricated with a microscopic film of antioxidant protection. Sealed off from damaging oxidation and cooled by the RIMEXCEL fluid, maximum bonding strength is retained for section adhesion in both the inner liner and the ply body. Should a section edge crack or pull loose, RIMEXCEL will follow the air into the exposed cord and seal it off from air penetration. Under no circumstances will RIMEXCEL cause a section or patch to lift or peel.
Safety Data Sheets