The RIMEX Rim Component Stand is used for the safe storage of rim components on industrial sites. By providing an elevated storage position off the ground, these stands minimise the risk of component corrosion. The design of the stands allows a back-to-back or side-by-side configuration to maximize site space efficiency.

49” and 51” Rim Component Stand

The RIMEX Rim Component Stand is designed to store 49” and 51” rim components.

Part Number: RMX-0900

• Safe Working Load: 2,700kgs
• Stand Weight: 212kgs
• Stand Dimensions: W: 1200mm x L: 1900mm x W: 1750mm

57” and 63” Rim Component Stand

The RIMEX Rim Component Stand is designed to store 57” and 63” rim components.

Part Number: RMX-0200

• Safe Working Load: 4,000kgs
• Stand Weight: 319kgs
• Stand Dimensions: W: 1200mm x L: 2200mm x W: 2100mm

Certification should only be issued under the following provisions:

1. The Rim Component Stand is to be used only for its intended purpose:
   • RMX-0900: Storage of 49”, & 51” rim components with a maximum combined weight of 2,700kg.
   • RMX-0200: Storage of 57”, & 63” rim components with a maximum combined weight of 4,000kg.
2. The components must be lowered slowly into position and not permitted to drop onto the frame.
3. It is the responsibility of the client/user to complete safe work procedures for the item.
4. If the stand sustains damage, it should not be used until inspected and deemed safe by a competent person.
5. Consult RIMEX engineering for all other issues.