RIMEXCEL

• RIMEXCEL stops rust build up by providing a protective anti-oxidant on wheels and rims.
• RIMEXCEL installed in the recommended quantity provides rust protection from the day the wheel is installed until it is dismounted.
• RIMEXCEL removes existing rust scale from wheels and rims and reduces the amount of downtime normally required for refinishing wheels and rims.
• RIMEXCEL will reduce labor costs for tire demounting, eliminate the need for messy coatings of rim and beads, and reduce rim loss from scale and pitting. No More Corrosion!

AP Green
The new enhanced performance RIMEXCEL will offer greater corrosion protection for your rims and wheels and will be even more environmentally and safety friendly.
(See Safety Section for MSDS details)

MLT Formula
This is a mid-grade formula with extra freeze protection to -25 degrees C
(See Safety Section for MSDS details)

Arctic Formula
Provides extra freeze protection for cold arctic climates. It is good to -50 degrees C.
(See Safety Section for MSDS details)

Reduces Air Loss For Longer Tire Life
Between regular air checks, some loss of tire P.S.I. may happen. With each pound of pressure loss, load carrying capacity is reduced and tire temperatures increase. RIMEXCEL reduces this normal air loss by at least 60%. Bead seats, O rings, vent hole leaking, blistered or cracked inner liners, even liners that are lifted loose from the ply, will be sealed off very effectively by RIMEXCEL.

Easy to Use!
RIMEXCEL may be poured into the tire prior to mounting, or installed while inflated by portable applicator tank.

Safety Enhancement
RIMEXCEL is a non-flammable substance, safe for personnel and equipment. RIMEXCEL will frequently detect cracked rims before cracks are large enough to become a hazard to personnel. No fibers or fillers are used in the RIMEXCEL formulation so that rim cracks or serious tire injuries can lose air normally, reducing the chance of tire loss or blowout as the injured area expands in size.

Section Repairs
RIMEXCEL keeps the inner liner lubricated and coated with a microscopic film of anti-oxidant protection. Sealed off from damaging oxidation, and cooled by the RIMEXCEL fluid, maximum bonding strength is retained for section adhesion in both the inner liner and the ply body. Should a section edge crack or pull loose, RIMEXCEL will follow the air into the exposed cord and seal it off from air penetration. Under no circumstances will RIMEXCEL cause a section or patch to lift or peel!